PDA

View Full Version : CRX integra conversion



CRXSiR
03-26-2002, 06:01 PM
Hey whats up peeps i want to get the front end of an integra to put it on my 91 crxsir but i haven't found a place to get one yet does anyone know where i can?? thanks .... :???: :???:

Nameless
03-26-2002, 06:09 PM
No. Spend that money on some kegs or something, dont hurt the car. :smile:

CRXSiR
03-26-2002, 06:12 PM
lol, nah i get the beer for free, i want to put the integra front cuz my front is mest up and hard , but yeah thanks lol :lol:

Nameless
03-26-2002, 06:39 PM
Sorry man, I am against conversions. Good luck.

CRXSiR
03-26-2002, 06:43 PM
its cool im not sure yet but if i have to fix my front its crappy, but if im gonna spend money might as well get something no one has around here , you know what i mean? i have the supra light conversion already. :smile:

JDMRicePolice
03-26-2002, 06:57 PM
An integra front end would be to big for your CRX. If you do manage to cutom fit it, it would look retarded since the front is to wide and big for the back.

CRXSiR
03-26-2002, 07:01 PM
http://iquebec.ifrance.com/hondafan/intcrx.htm oh i c , well then i guess ill just fix it up and get the z3 fenders or something cuz im trying to cut down on the prise lol working in a restaurant does bring in much income specially if your 17 lol that is the site where i got the idea to get the integra front end. thanks :smile:

Weapon-X
03-26-2002, 07:06 PM
that looks fuckin gay. don't do it. go back to the crx board.

JDMRicePolice
03-26-2002, 07:11 PM
On 2002-03-26 19:01, CRXSiR wrote:
well then i guess ill just fix it up and get the z3 fenders or something

NO Z3 fenders!
You have just recieved a ticket for rice in a no rice zone.

CRXSiR
03-26-2002, 07:18 PM
oops my bad lol :grin:

Nameless
03-26-2002, 07:29 PM
On 2002-03-26 19:01, CRXSiR wrote:
http://iquebec.ifrance.com/hondafan/intcrx.htm


AHHHHHHHHHHHHHHHHHHHH!!

CRXSiR
03-26-2002, 07:33 PM
cant you guys tell im new at this internet crap lol , but yeah i dont know what to put on the car so if you have any suggestions lol help. :lol:

90tegboy
03-26-2002, 11:04 PM
i dont think it looks too terribly bad. i wouldnt do it and i think conversions are stupid as well. id go to the junk yard and try to find some replacement panels you could grab from some other crx's and just repair yours. itll be less money in the long run and your car wont get a messed up weight ratio.

CRXSiR
03-27-2002, 02:06 AM
thanks 90 teg boy and yeah ill probably hit up a yard cuz whats really mest up on my car right now is the fenders and i need to get my sir hood cuz since i got a b16 it doesn't clear, then i have to get new radiator support so ill just fix that up for now i guess. thanks..... the supra light conversion doesn't look that bad though :smile:

B20GSR
03-27-2002, 05:00 AM
CRXsiR you'll find that every one has there own opinion about everything, so keep in mind that when you ask something you'll have people disagree with your ideas or maybe even down you for them. Remember this though, it's your car and your style. You do what you want. If you need a teg front end I have one and access to at least 4 others. Three of them are the second gen Tegs (90-93) and two of then are third gen Tegs (94-01). You are looking at spending anywhere between $300-$1000 depening on the year and condition of the front end. Keep in mind that this is only the price for the front end, that doesn't include shipping or the expensences of having the front end put on, aligned, preped, then painted. So yes everyone else has a point, it will be expensive, but if that's what you want-
go for it. Good Luck. :wink:

_________________
Japanise ride, American pride.

<font size=-1>[ This Message was edited by: B20GSR on 2002-03-27 05:02 ]</font>

96integsr
03-27-2002, 02:41 PM
I think it's tight. Rice ticket? Give me a break......

GEN2LSINTEGRA
03-27-2002, 04:25 PM
It doesn't look that bad but it will be pricey if you do decide to do it.

quicksilver
03-27-2002, 04:47 PM
contact Honda at last resort for the headlight housing. you'll prolly also have to get a new core support welded on. so once you have those parts go to a body or fabrication shop and tell them what you want. for the right price, a body shop will do anything.

PROFILES2000
03-27-2002, 05:06 PM
um im closing this crap :???: