95 integra died intersection

mrand · 10-03-2009, 08:32 AM

my 95 intergra died in the middle of an intersection. the car turned over fine, and when i sprayed crab starter it still did not catch. When I checked the spark there was none. maybe a problem with a relay? any help would be welcome.

matt

mrand · 10-03-2009, 03:11 PM

I changed the plugs and 2 of them were coverd with oil. thoughts?

7thgenV6coupe · 10-24-2009, 11:26 PM

http://www.spark-plugs.co.uk/pages/t.../diagnosis.htm

try that.

I think its your valve cover leaking oil OR the O-ring seal thats used to keep oil from reaching the plugs

SteelCityRacer · 10-28-2009, 11:50 AM

a little late but since no one said it.. its probably your distributor check for power going into dizzy if you hav power comming in and no spark comming out then its bad

10-03-2009, 08:32 AM	#1
mrand New Member Join Date: Oct 2009 Posts: 2	95 integra died intersection my 95 intergra died in the middle of an intersection. the car turned over fine, and when i sprayed crab starter it still did not catch. When I checked the spark there was none. maybe a problem with a relay? any help would be welcome. matt

10-24-2009, 11:26 PM	#3
7thgenV6coupe Commander of the vee-SEXX Join Date: Feb 2008 Location: MD Posts: 514 Images: 9	http://www.spark-plugs.co.uk/pages/t.../diagnosis.htm try that. I think its your valve cover leaking oil OR the O-ring seal thats used to keep oil from reaching the plugs __________________

10-28-2009, 11:50 AM	#4
SteelCityRacer Bronze Member Join Date: Apr 2005 Location: Pittsburgh, Pa Posts: 311	a little late but since no one said it.. its probably your distributor check for power going into dizzy if you hav power comming in and no spark comming out then its bad __________________ 93' civic si b16 sir2... sold 93' civic cx.... got hit by semi..have a 94 teg now just rebuilt ls with p30 pistons and got a sir2 lsd trans... and more.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2009, 03:11 PM	#2
mrand New Member Join Date: Oct 2009 Posts: 2	I changed the plugs and 2 of them were coverd with oil. thoughts?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)