Post Pics of your Civic/Crx/Del Sol

[stew83]

HERE IS MY 99 SI I PICKED UP AS A PROJECT CAR ALMOST BACK TO 99% BUT SHE WILL ALWAYS BE A DIRTY GIRL

B16A2
SKUNK 2 EXHAUST
DC SPORT HEADER
AEM PULLYS
AEM COLD AIR INTAKE
10K HID HEADLIGHTS
ADJUSTABLE COILOVERS
FRONT&REAR CAMBER KIT
CHROME DIPPED SI WHEELS BUT NE SUGGESTIONS ON AFTERMARKET AS FAR AS STYLE ALSO SHOULD I KEEP KIT OR GO STOCK UP FOR ANY IDEAS GOOD OR BAD

[stew83]

HERE IS MY 99 SI I PICKED UP AS A PROJECT CAR ALMOST BACK TO 99% BUT SHE WILL ALWAYS BE A DIRTY GIRL

B16A2
SKUNK 2 EXHAUST
DC SPORT HEADER
AEM PULLEYS
AEM COLD AIR INTAKE
10K HID HEADLIGHTS
ADJUSTABLE COILOVERS
FRONT&REAR CAMBER KIT
CHROME DIPPED SI WHEELS BUT NE SUGGESTIONS ON AFTERMARKET AS FAR AS STYLE ALSO SHOULD I KEEP KIT OR GO STOCK UP FOR ANY IDEAS GOOD OR BAD

[chino12052]

Originally Posted by smithby

Your a lucky man.

By the sand, do you mean the middle east ?

If so, Thanks for Serving.

ya i just got back from Iraq was an easy tour not much going on were i was.

[rock-e-o]

[/IMG]

[Nucleardonkey]

My Civic EE9 :D

[Mac2118]

It's been awhile since I posted pics of my car on here and I've done a few mods to it since then. 2007 Civic Si











Engine:
AEM SRI Intake
Vibrant Header w/ HFC
Vibrant Catback exaust
DIY Wrinkle Red Valve Cover
Wrinkle Black IM Cover
Mugen Oil Cap
Type R Dipstick
Corsport Shortshifter
Corsport Shifter Bushings

Suspension:
Tein S-Tech Springs
Skunk 2 Rear Camber Arms
17x7.5 WedSport Wheels
Yokahama sDrive 235/40/17
Red Painted Calipers

Exterior:
8000k Hid Lowbeams
2500k Nokya Fogs
Seibon VISS Carbonfiber Hood
Seibon Carbonfiber Trunk
35% Tint

Interrior
Graphics Xpressions Steering Wheel Overlay
Type R Shift Knob
Type R Shiftboot

Ordered and waiting to arrive:
P2R Throttle Body Spacer
P2R TBS Gasket
P2R Fuel Rail
Hondata IMG
YoSpeed Battery Tiedown

In the process of selling my wheels so I can throw on some 18" Work VS-XX's

[CRXFreak]

1991 crx dx with over 298k miles. i plan to swap the d16a6 head and IM along with p29 pistons and d16y8 head gasket.
engine:
weapon r short ram intake on stock air duct with spectre air filter
custom 2 1/4 inch exhaust pipe with a DNZ dual tip muffler

suspension:
adjustable coil over springs
175/70R13 ford steelies

exterior:
jdm chrome projector headlights
clear corners
jdm chrome tail lights

interior:
APC carbon fiber shift nob for automatic
late 80's integra shift boot

[KingKodo]

1996 DX coupe w/ 5speed. All stock. Purchased with 74k on it for 4k about a year ago.

I found a HUGE MOTHERF***ING hole in the roof under the black trim piece about 5 months after I got it. The hole was right at the lip and under the trim, about 1in wide and around the length of my hand so about 7-8 inches long. Litterally whole area was gone, had to grind out a ton of material including the seal between the fender and the roof pates. Rebuilt the spot with fiberglass+Nitro Stan+alot of paint. I dont have any pictures of it now but it is rebuilt and painted and sealed and what not, just isnt sanded smooth. I found the same thing happening at all 4 corners of the roof but I caught the others before they got really bad. Anyways, I Love making stuff by hand and am planning on making an HHO fuel Booster kit (almost done actually), air intake, exhaust pipes, and some other stuff that I will get to when I have time.

[waristoking]

Well guys, i'm new to the car world. I just bought my 1989 civic and there is work to be done. Any help or opinion are welcome. I will need to do some engine work, like changing the piston rings and the head gasket. But im unsure if doing this or just wait till engine blows out and install a D15b vtec. The one in the pic is a d15b carburator.

[Built By Notorious]

MAC2118 ....VERY CLEAN SI