Page 5 of 9 FirstFirst 123456789 LastLast
Results 101 to 125 of 208

Thread: Official What Your Car Has Thread!

  1. #101

    Default

    Quote Originally Posted by Grey_Runner
    make a thread, post some pics
    http://www.hondahookup.com/forums/sh...d.php?t=127795

  2. #102

    Default

    96 Civic LX
    98 jdm ex swap,exedy stage 1 clutch,Fidanza 7lb Flywheel,Greddy TD04 turbo,Greddy type s bov,JDM intercooler kit,Greddy Profec E-01 boost controller,Hondata S300,Hondata P28 with built in jumper for obd1 (no speed cut off)Yay!!Arp Studs.....some bootleg ICW raceing rims...Car tuned at Church's automotive testing in Wilmington for 4 hours....

    Shes a sleeper!!!!
    Last edited by gcarlin_818; 02-26-2007 at 09:51 PM.

  3. #103

    Default

    98 Civic EX Coupe: D16Y8-AEM short ram intake, AEM under drive pulleys, MSD Ext coil conversion(incl 8.5 MM wires, MSD rotor, and Blaster 2 coil), DC header, gay eBay test pipe, and 2.25" cat-back exhaust. Stage II Centerforce clutch, with 10LB Aluminum Spec Flywheel.
    soon to come on the coupe, built head (ported & Polished, Stage II crower cam, AEM cam gear, skunk 2 springs and retainers, newly milled, and copper .5 head gasket) then a skunk 2 intake manifold, GS-R throttle body(hopefully), Apex-i VAFC 2, followed with a dyno tune.

    96 Civic DX hatch H22A- has a cheap auto zone "high flow" intake cone on it temporarily mounted to the stock air box tube. Custom bent 2.5" exhaust from manifold back with a high-flow, and custom muffler to a stock muffler fake out. its the weekend sleeper

  4. #104

    Default

    99 hx
    d16
    aem intake
    worn out tires

  5. #105

    Default

    1996 GSR stock for now
    1996 acura integra GSR
    energy suspension
    DC sports 4-1 header
    DC sports single canister cat back
    AEM short ram intake
    motegi DV5 17" rims
    Moroso 5 qt. oil pan



    NEW M1151 armored hummer with an armoured electric turret and .50 caliber machine gun. top speed: 80 mph

  6. #106

    Default

    and a M1114

    frag 5 objective doors
    bullet proof glass
    lots of other armor on it
    light bars front and rear,
    armoured electric turret with bullet proof glass
    flood lights on the sides.
    GPS and tracking.
    36.5" tires
    top speed 60 mph
    acceleration-0-20: 15 seconds
    all the lights are for night driving when they put bombs oout at night we can see them.
    1996 acura integra GSR
    energy suspension
    DC sports 4-1 header
    DC sports single canister cat back
    AEM short ram intake
    motegi DV5 17" rims
    Moroso 5 qt. oil pan



    NEW M1151 armored hummer with an armoured electric turret and .50 caliber machine gun. top speed: 80 mph

  7. #107

    Default

    Quote Originally Posted by 96teg2130
    and a M1114

    frag 5 objective doors
    bullet proof glass
    lots of other armor on it
    light bars front and rear,
    armoured electric turret with bullet proof glass
    flood lights on the sides.
    GPS and tracking.
    36.5" tires
    top speed 60 mph
    acceleration-0-20: 15 seconds
    all the lights are for night driving when they put bombs oout at night we can see them.
    damn that mother is a sleeper for sure
    :'96 Honda Prelude SI - Sold
    ::'93 Honda Civic CX, built and boosted on 14 PSI - Sold
    :::'91 Acura Integra GS - New whip. ~New photo shoot to come!

  8. #108

    Default

    The Lude is gone...now it's this

    1993 Civic cx

    Engine
    '99 d16y8
    JE pistons 9:1
    Eagle rods
    ARP head studs
    RC 550cc injectors
    Walbro 255lph in-tank fuel pump
    AEM fpr
    Bym log manifold
    Tial 38mm wastegate
    Turbonetics t3/t04 hybrid turbo
    3" custom downpipe
    3" RS-R Ex-Mag exhaust
    TurboXS monster intercooler
    Apex'i power sequential bov
    TurboXS manual boost controller
    p28 ECU with skunk2 chip 7800 redline 2 step rev limiter/launch control
    FAL fan
    d16z6 transmission
    ACT clutch

    Suspension
    Authentic Mugen front strut bar
    Megan Racing c-pillar bar
    Password:JDM rear strut
    Password:JDM rear tie bar
    Omni Power LCA's
    Omni Power coil-over sleeves with new GSR shocks
    Omni Power front camber kit
    Omni Power rear camber kit
    GSR rear disc brake conversion
    steel braided brake lines

    Interior
    JDM eg6 cluster
    JDM Carboy seats
    Mugen knockoff harnesses
    Autometer white-face boost, oil pressure, air/fuel gauges

    Exterior
    JDM sidemoldings
    SI wheels with bfg g-force tires
    JDM black housing headlights
    Vision corner lights
    JDM fenders with sidemarkers
    charcoal gray paint
    :'96 Honda Prelude SI - Sold
    ::'93 Honda Civic CX, built and boosted on 14 PSI - Sold
    :::'91 Acura Integra GS - New whip. ~New photo shoot to come!

  9. #109
    Bronze Member humboldtlude's Avatar
    Join Date
    Apr 2007
    Location
    Humboldt county, CA + Truckee, CA
    Posts
    706
    Images
    3

    Default

    1992 honda prelude Si H23a, stock besides a brand X CAI i got on ebay for 35 bucks
    gettin a flowmaster dual pipe catback exhaust system when i get the 500 dollars saved up

  10. #110

    Default

    .
    H22A bubble on crome

    "HP? Why all about HP? Take a look at the torque curve too. B18C barely has enough torque to open a beer " - spoonredneck

  11. #111

    Thumbs up 1987 ef3 civic si zc 1600 dohc

    head ported and polished planed 5mm .care of'kelford camtech $1500

    hardend valve springs .co'kelford camtech $700

    larger valves .co'kelford camtech $460

    stage 3 road race cams .co'kelford camtech $1800

    mugen ecu 10800rpm cutout .japanesse race supples in new zealand $500

    platnium plugs $35 each

    racing spark leads $230 set

    5cyl honda plenuim and injec .canterbury engine builders $430

    adapion plate for 5cyl plenuim .canterbury engine builders $75

    300hp fuel pump and serg tank .japanesse race supples in new zealand $900

    ajustible cam gears .japanesse race supples in new zealand $700

    forged pistons .japanesse race supples in new zealand $1200 set inc bearings

    b18c crank .strong bros honda canterbury $100

    lightend and balanced flywheel .canterbury engine builders $60

    3 prong clucth plate .japanesse race supples in new zealand $700

    extractors into to flauge into twin 2"pipes into flauge into single pipe that is 2" exhust all the way to the rear of car incl one coby muffler with 3"tip.mr muffler in canterbury $850

    disk brake rear end .strong bros honda canterbury $200

    custom over sized fuel lines .canterbury engine builders $300

    first jdm gearbox .strong bros honda canterbury $550
    and now 2nd jdm gearbox $200

    and im reading recipts as im puting list of mods up

    car is lowered on gab adjustibles all round

    15/7 rays engineering 4 spoke racing alloys with 225/50/15 on front and 215/50/15 on rear

    jdm front bar

    jdm twin rear spoilers

    front strut brace

    rear strut brace

    1000wat fusion amp 700watt fusion 12" sub and box pioneer cd mp3 headunit pioneer front splits wif crossovers mid range and tweeters and 2x350 watt 6/9s in rear tray

    front drivers seat is autosport one peace race seats momo wheel and gear knob and pedals

    i built this car to prove that you dont need turbo or vtec to have a fast car i could say what i have raced and beatin but ill just so yous when i get car back from geting roll cage finnished and ill put videos up on this web site
    Last edited by ntvtec; 07-25-2007 at 10:46 PM.

  12. #112

    Default

    ^^WOW! Those are some crazy exspensive parts!
    and only 2" exhaust for such a "fast" car?
    cant wait to see the vids!?!?!

  13. #113

    Default

    well if itz worth it i mite go with k20 swap but i will find out if it fitz 1st as i know that inlet is differnt with k20 engines

  14. #114

    Default

    1987 Honda Civic Si Bone Stock
    EW4 1.5 motor with some really bad oil leaks sitting on floor next to the car.


    Last edited by gustav129; 07-13-2007 at 06:45 PM.

  15. #115

    Talking

    91 civic si H/B

    b16 vtec swap
    lsd trans
    header
    exhaust
    intake
    intake maniflod
    throttle body
    (205/40ZR17 84W) Falken RT-615 tires

    post more when i get more parts.
    tell it how it is or shut the fuck up

  16. #116

    Default

    hi my name is elias and i am from greece.here are some information about my streetfighter!!!

    HONDA CIVIC SEDAN 1994 EG

    ENGINE

    1.B18C JDM SWAP

    2.INTEGRA TYPE R GEARBOX WITH L.S.D.

    3.BRAKES AND STRUT BARS FROM TYPE R

    EXTERIOR

    1.COLOR BLACK

    2.A/W FROM TYPE R

    INTERIOR

    CLUSTER WITH 280KM SPEEDOMETER
    AND 11.000RPM WITH REDLINE STARTING AT 10.000RPM

    SPECIFICATIONS

    1080KG

    0-60miles in 5.7 sec

    210 horsepower

    1/4 mile in 14.4
    HONDA CIVIC SEDAN EG B18C6 TYPE R 210HP

  17. #117

    Default

    87 porsche 951
    stage 2 MAF
    hard pipes
    mafterburrner piggyback fuel controller
    LR max chips
    3 bar FPR
    Evo motorsports bypass valve
    3" thermal coated polished turbo back exhaust
    spec stage 2 clutch
    greddy profec b coost controller running at 18psi
    huntly racing A/F gauge
    koni adjustables all 4 corners

  18. #118

    Default

    a Hyundai lantra with a turbocharged 2.0 liter vtec yes it weird

  19. #119

    Default

    91 TSI. 404awhp and 372ft-lbs.
    mods: http://www.hondahookup.com/forums/sh...d.php?t=136202
    will be posting some kills very soon once i get the trany fixed. will post time slips after sept 29th too..

  20. #120

    Default Rides

    93 Honda Civic EX (D16z6)


    Short ram intake
    Custom 2.5in Catback With Intimadator muffler
    DC 4-2-1 two piece headers
    Street Fighter front bodykit
    Buddyclub rear bodykit
    Buddyclub sideskirts

    94 Acura Integra LS (B18b1)

    Stock (just bought the bad boy)

  21. #121

    Default

    Don't know how I missed this the last year. Well, the old setup woulda been better but this is my current setup sitting in the parking lot getting rained on at the moment:

    1996 Acura Integra RS

    Motor/Tranny:

    B18B1
    Short Ram Intake w/ Fujita Filter
    Accell 8mm wires (hate em..but they work)
    Quaife LSD
    ACT Xtreme Pressure Plate and ACT Modified Street Disc (resurfaced OEM FW)
    Skunk2 Catback exhaust w/ Carsound high flow cat (2.25")
    Password: JDM Magnetic oil and trans. bolts
    Spoon radiator cap
    Spoon thermostat and thermoswitch
    Royal Purple 5w-30 synthetic
    OEM Honda Manual Tranny Fluid
    A/C Compressor removed and all related A/C components.

    Stance

    16 x 7, e45 offset, bronze Rota Circuit 10's wrapped in Toyo Proxes 4 205/45/16
    16 x 7, e40 offset, black Rota Slipstreams (currently sittin in my garage)
    Skunk2 adjustable upper control arm front (-1 degree front)
    Omni Power rear adjustable upper control arm rear (-.5 degree rear)
    Omni Power full body coilovers with 10K front and 8K rear..
    ITR front tower bar
    Spoon sports rear tower bar
    Energy Suspension trailing arm bushings

    Stopping

    OEM brake calipers and rotor size
    Rotora slotted rotors front, OEM blank rear
    Hawk HPS pads all 4 corners
    Goodridge stainless brake lines with some Autozone brand DOT 4 fluid

    Interior

    B&M short throw
    OmniPower quick clutch master cylinder
    Spoon Sports shift knob
    Mugen Pedal's
    gutted trunk space
    generic oil pressure gauge
    Old school Pioneer deck (have no idea, was in the car when I bought it)
    Odometer that reads 219,150miles....

    Exterior

    ITR spoiler
    Some shittily mounted mirrors(came on car)
    Clear turn signals( came on car, but I changed the bulbs to amber instead of the neon blue that were in them... ugh.)
    Grand Masta Sexy
    2004 Subaru WRX Wagon
    1983 Toyota Pickup 2wd w/ 22R block - 20R head

  22. #122

    Default

    1992 Acura Integra RS

    JDM B18B Swap
    AEM Cold Air Intake With bypass
    Chrome Coated 4-2-1 Header
    2.5" Full Cat-Back Exhaust with Borla Muffler
    Short Throw Shifter
    Dropped 2"
    Zexius iX-326 (205-40-17)
    NGK Spark Plugs And Wires


    Running About 160 whp
    Car Is Pretty Quick, Even Was Quick With The Old B18A1-RIP
    1992 Acura Integra RS JDM B18B, AEM CAI, Tanabe Cat-back, Header, Dropped, Stage 2 Clutch, Lightened Flywheel, Gay Ass 17's.

  23. #123

    Default

    2008 TSX 6mt Navi

    Just got it a few weeks ago, as of right now only things ive done is:


    INJEN CAI
    DC sports Header
    Progress Rear Sway Bar
    Yellow Fogs
    Painted Grill
    Comptech Short Shift Kit
    Hardwired V1
    Last edited by jdmaccord; 11-27-2007 at 08:35 PM.
    2008 TSX 6mt navi

  24. #124

    Default

    Quote Originally Posted by 92TegRS
    Running About 160 whp
    bullshit
    160 at the crank...maybe.

  25. #125

    Default

    Quote Originally Posted by 95civicex
    bullshit
    160 at the crank...maybe.

    crank maybe...wheel not so much. thats what my hatch pushes whp...and im faster than a B18B with bolt ons....


    PS JDMaccord...i wanna see your new car.pix?

Thread Information

Users Browsing this Thread

There are currently 7 users browsing this thread. (2 members and 5 guests)

  1. RidgePi,
  2. YarickLit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •