Plans for your DSM

[Batman™]

2A051D - Electronic Warfare Journeyman

[doober75]

finally done with tranny problems! i went with a "race package" with a 4 spider diff for better around town driving from dogboxracing.com check them out sometime great guys and VERY fast turn around rate. dunno if im gonna buy a set of drag radials and new rims or pick up a jeep for a DD now with the way gas is..

[indy3402001]

are you selling any of ur parts off you dsm yet batman

[Batman™]

In about another 3 weeks parts will be up for sale. What do you need? Let me know and I'll try to get you a good deal.

[doober75]

just about ready to get rid of mine... im picking up a 92 tsi just with a 16g here hopefully really soon. but anyways would you be interested in selling you the whole fmic shit? BOV and all?
btw indy i have spare parts also with little or no miles on in boxes in my basement. let me know what you need

[Batman™]

actually i am planning on selling my entire fmic setup, bov/piping/all. It's specifically made for a 2G though.

[indy3402001]

im looking for a bunch of stuff to make my car faster and more reliable at the same time like a 255 walbro fuel pump 16g turbo or bigger 680cc injectors or bigger fmic for a 1g a bov and a bigger waste gate housing with o2 sensor hole boost controller cam gears and cams and a intake system for a 1g but yah let me kno what u got im just puttin that stuff out there but i can use what ever also looking for somthing to tune with like dsm link or along that lines

[doober75]

actually i am planning on selling my entire fmic setup, bov/piping/all. It's specifically made for a 2G though.

oh fuck thats rite man..

[Batman™]

Out of that list indy, I have a Greddy Profec B Spec 2 Boost Controller with steering wheel mounted boost switch, and I have Fidanza Cam Gears.

I think that's about all that'll really work for you. My injectors are 950cc, I have a Bosch 044 Fuel Pump, a T3/T4 Turbo, a 2G Short Route FMIC Kit, a Tial BOV, a O2 Housing for a T3/T4 Turbo, Forced Performance FPCam2x Cams, and a Forced Performance 4" Intake and Filter.

Most of that is way large for a setup like you're wanting to put together, but I'll sell it to you if you want it. :P

[indy3402001]

how much for the boost controller and cam gears

[Batman™]

To be honest I haven't even thought about it. I need to get the car back into my garage and start disassembling and pricing.

I think I want to sell the whole longblock together, already timed in and all. I know it'll be harder, but someone will get a ridiculous deal.

[Batman™]

and check your pm's.

[94CivicKid]

Batman, I finally ditched the civic and got myself a 95 gsx. Its so effing sick! I plan on probably putting a 16g in it and doing a full custome exhaust, suspension and all that great stuff. It's bone stock so I get to build it from the ground up.

[Batman™]

Good luck buddy. Mine's almost completely parted out now.

[David Luiz]

Some hilarious answers above.

[Ballalmeena]

Okay. This should be fairly straight forward and simple. I'm interested to know what you plan on doing to your car in the next year. This is not a bullshitting thread, this is honest to god what you are planning on doing. I will start.

My plans:

Tear the car down to the frame, and start cleaning out any rust/grease/grime/sand whatever.

Weld all extra holes and smooth them over.

Seam weld all panels, and remove the body glue.

Find a 2.4l G4CS block, which is a Hyundai Sonata 6 bolt 2.4 liter version of the 4G63.

FFWD Butcher 2.4l Crank

Groden 6 Bolt rods.

Kiggley Main Girdle.

Wiseco stroker pistons.

Moroso Oil Pan.

ARP Tool Steel Head Studs.

Block O-ringed.

SBR Stage 5 1G Head with Forced Performance Dual Spring Kit.

Head O-Ringed

Forced Performance FPCam3x Cams

Mitsubishi MLS Head Gasket

JM Fabrications 1G Race Intake Manifold

Nissan Q45 Throttle Body

JM Fabrications COP Plate

Punishment Racing T3 Exhaust Manifold with Tial 44mm External WG Flange

PTE PT6776R T3/T4 Ball Bearing Turbo Rated at 75 lb/min flow with 4" Ported Compressor Cover

Punishment Racing T3 4 Bolt Style O2 Housing

Megan Racing 3" Downpipe

Shep Racing Stage 4 Transmission with Upgraded 4 Spider Differential

















That will be the plan for the next year as far as parts. From there I'll be doing bodywork, painting the car, running new lines for everything, rebuilding the engine wiring harness, installed AEM EMS, doing a custom gauge cluster, starting on the interior, etc.

Same

[Morgan Harris]

What happened to this build? It's been a couple of years since the last update.