PDA

View Full Version : Cable Clutch To Hydraulic Clutch



sxc_clae
07-30-2006, 04:06 AM
Hey, I'm puttn a b16a1 into my mini and need to convert the cable clutch to a hydraulic one.

i'll use an uprated mini clutch master cylinder but need to know what other bits attch to the motor for me to do it?
Can it be done to the b16a1's?

Claeten

civic9202
09-26-2006, 03:51 PM
idk if this will help. but here are some conversion kits.




http://www.jcwhitney.com/webapp/wcs/stores/servlet/Product?storeId=10101&Pr=p_Product.CATENTRY_ID%3A2009588&productId=2009588&catalogId=10101


good luck

buklae
10-24-2006, 03:30 PM
www.hasport.com

has that cable to hydro conversion

me and my buddy put a b16a2 into his 88 crx and the motor had a hydro tranny so we had to buy the hasport cable to hydro conversion kit along with motor mounts and shift linkage sinec the a2 essentialyl goes in the 92-95 civics....parts were fairly pricey

Batman™
10-24-2006, 11:43 PM
did i read right that this is going into a mini? if so you'll need to extend the doghouse by about 4 inches. at least mini-tec had to.